2014

M. Silani, H. Talebi, S. Ziaei-Rad, P. Kerfriden, S. P.A. Bordas, T. Rabczuk

Stochastic Modelling of Clay/Epoxy Nanocomposites

Composite Structures, Volume 118, December 2014, Pages 241-249

 

A. kabiri Ataabad, H. Hosseini-Toudeshky and S. Ziaei Rad

Experimental and Analytical Study on Fiber-Kinking Failure Mode of Laminated Composites

Composites Part B: Engineering, Volume 61, May 2014, Pages 84-93

 

M. Yazdani Ariatape, M. Mashayekhi, S. Ziaei-Rad

Prediction of All-Steel CNG Cylinders Fracture in Impact by Using Damage Mechanics Approach

Scientia Iranica B (2014) 21(3), 609-619

 

M. Moore, S. Ziaei-Rad, A. Firouzian-Nejad

Temperature-Curvature Relationships in Asymmetric Angle Ply Laminates by Considering the Effects of Resin Layers and Temperature Dependency of Material Properties

Journal of Composite Materials, 2014, Vol. 48(9) 1071–1089

 

Reza Hedayati, Saeed Ziaei-Rad, Arameh Eyvazian,, Abdel Magid Hamouda

Bird strike analysis on a typical helicopter windshield with different lay-ups

Journal of Mechanical Science and Technology , April 2014, Volume 28, Issue 4, pp 1381-1392

 

Reza Hedayati, Saeed Ziaei-Rad

A New Bird Model for Simulating Bird Strike on Various Lay-ups Used in Transparent Components of Rotorcrafts

Journal of Aerospace Engineering, (2014) 27(1), 76-85

 

H. Salimi-Mofrad, S. Ziaei-Rad, M. Moradi

Vibrational Power Flow Analysis of a Cylindrical Shell Using Four-Point Technique

International Journal of Acoustics and Vibration, Vol. 19, No. 2, 2014 (pp. 127-130)

 

A. Zargarian, M. Esfahanian, J. Kadkhodapour, S. Ziaei-Rad

Effect of solid distribution on elastic properties of open-cell cellular solids using numerical and experimental methods

Journal of the Mechanical Behavior of Biomedical Materials, Volume 37, September 2014, Pages 264-273

 

Mohammad Jafari, Saeed Ziaei-Rad, Noushin Torabian

A Dislocation Density-Based Model for Analyzing Mechanical Behavior of Dual-Phase Steels

Metallography, Microstructure, and Analysis , June 2014, Volume 3, Issue 3, pp 185-193

 

Iman Dayyani, S. Ziaei-Rad, M. Freiswell

The Mechanical Behavior of Composite Corrugated Core Coated with elastomer for Morphing Skins

Journal of Composite Materials June 2014 48:1623-1636

 

M. H. Jalali, M. Ghayour, S. Ziaei-Rad, B. Shahriari

Dynamic analysis of a high speed rotor-bearing system

Measurement, Volume 53, July 2014, Pages 1-9

2013

M. Jafari, S. Ziaei-Rad, N. Nouri

Modeling of the plastic deformation of polycrystalline materials in micro and nano level using finite element method

Journal of Nano Research, Vol. 22, pp.41-61, 2013

 

Reza Hedayati, Saeed Ziaei-Rad

A new bird model and the effect of bird geometry in impacts from various orientations

Aerospace Science and Technology, Volume 28, Issue 1, July 2013, Pages 9-20

 

S.A. Atashipour, H.R. Mirdamadi, R. Aamirfattahi, S. Ziaei-Rad

Application of wavelet transform for damage detection in a thick steel beam based on guided ultrasonic waves

Modares Journal of Mechanics, Vol. 12, No. 5, pp. 154-164, 2013 (In Farsi 1391)

 

E. Raisi, S. Ziaei-Rad

The worst response of mistuned bladed disk system using neural network and genetic algorithm

Meccanica (2013) 48:367–379

 

A. Ariaei, S. Ziaei-Rad, M. Malekzadeh

Dynamic response of a multi-span Timoshenko beam with internal and external flexible constraints subject to a moving mass

Arch Appl Mech (2013) 83:1257–1272

 

Reza Ebrahimi, Mohsen Esfahanian, Saeed Ziaei-Rad

Vibration Modeling and Modification of Cutting Platform in a Harvest Combine by Means of Operational Modal Analysis (OMA)

Measurement, Volume 46, Issue 10, December 2013, Pages 3959–3967

 

H. Zarkoob, S. Ziaei-Rad, M. Fathi, and H. Dadkhah

The Effect of Piezoelectricity on the Mineralization of Calcium Phosphate in Piezoelectric Biomaterials

Advanced Science Letters, Volume 19, No. 1, January 2013, pp. 101-105

 

H. M. Khanlo, M. Ghayour, S. Ziaei-Rad

The effects of lateral-torsional coupling on the nonlinear dynamic behavior of a rotating continuous flexible shaft-disk system with rub-impact

Communications in Nonlinear Science and Numerical Simulation, Volume 18, Issue 6, June 2013, Pages 1524-1538

 

H. Ashrafizadeh, S. Ziaei-Rad

A numerical 2D simulation of part motion in vibratory bowl feeders by discrete element method

Journal of Sound and Vibration 332 (2013) 3303–3314

 

S. Katani, S. Ziaei-Rad, N. Nouri, N. Saeidi, J. Kadkhodapour, N. Torabian, S. Schmauder

Microstructure Modelling of Dual-Phase Steel Using SEM Micrographs and Voronoi Polycrystal Models

Metallogr. Microstruct. Anal. (2013) 2:156–169

 

S.A. Atashipour, H.R. Mirdamadi, M.H. Hemasian, R. Aamirfattahi, S. Ziaei-Rad

An effective damage identification approach in thick steel beams based on guided ultrasonic waves for structural health monitoring applications

Journal of Intelligent Material Systems and Structures, 24(5) 584–597, March 2013

 

M. Eftekhari, S. Ziaei-Rad, M. Mahzoon

Vibration suppression of a symmetrically cantilever composite beam using internal resonance under chordwise base excitation

International Journal of Non-Linear Mechanics, Volume 48, January 2013, 86-100

 

S. Katani, F. Madadi, M. Atapour, S. Ziaei-Rad

Micromechanical modelling of damage behaviour of Ti–6Al–4V

Materials and Design 49 (2013) 1016–1021

 

M. Silani, S. Ziaei-Rad, H. Talebi

Vibration Analysis of Rotating Systems with Open and Breathing Cracks

Applied Mathematical Modelling 37 (2013) 9907–9921

 

Iman Dayyani, Michael I. Friswell, Saeed Ziaei-Rad, E.I. Saavedra Flores

Equivalent models of composite corrugated cores with elastomeric coatings for morphing structures

Composite Structures 104 (2013) 281–292

 

Masih Moor, Saeed Ziaei-Rad, H. Salehi

Thermal response and stability characteristics of bistable composite laminates by considering temperature dependent material properties and resin layers

Applied Composite Materials (2013) 20(1), 87–106

 

R. Ramezanpour, M. Ghayour, S. Ziaei-Rad

A novel method for slant crack detection in rotors based on turning in two directions

Archive of Applied Mechanics, May 2013, Volume 83, Issue 5, pp 783-798

 

S. Adibi, S. Ziaei-Rad, F. Karimzadeh

Fabrication, measurements and Mechanical properties evaluation of nanocomposite Al6061-Al2O3 using finite element method

Journal of Numerical Methods in Engineering, Vol. 31, No. 2, 1, pp. 115-131, 2013 (In Farsi 1391)

 

M. Jafari, M.S. Talei, S. Ziaei-Rad

Simulation the mechanical behaviour of polycrystalline Fe by using crystal plasticity and Molecular dynamic methods

Modares Journal of Mechanics, Vol. 13, No. 9, December 2013 (1392 Farsi) , pp. 138-148

 

Mehdi Salehi, Saeed Ziaei-Rad, Mostafa Ghayour, Mohammad Ali Vaziri-Zanjani

A frequency response based structural damage localization method using independent component analysis

Journal of Mechanical Science and Technology, March 2013, Volume 27, Issue 3, pp 609-619

 

N. Nouri, V. Ziaei-Rad, S. Ziaei-Rad

An Approach for Simulating Microstructures of Polycrystalline Materials

Computational Mechanics, July 2013, Volume 52, Issue 1, pp 181-192

2012

V. Ziaei-Rad, N. Nouri, S. Ziaei-Rad, M. Abtahi

A numerical study on mechanical performance of asphalt mixture using a meso-scale finite element model

Finite Elements in Analysis and Design 57 (2012) 81–91

 

Reza Tikani, Saeed Ziaei-Rad, Nader Vahdati

Effective Reduction of Stiffness at Peak Frequency in Hydraulic Engine Mounts by Using Magneto-Rheological Fluids

Vibroengineering. Journal of Vibroengineering. June 2012. Volume 14, Issue 2

 

M. Eftekhari, M. Mahzoon, S. Ziaei-Rad

Effect of added tip mass on the nonlinear flapwise and chordwise vibration of cantilever composite beam under base excitation

International journal of structural stability and dynamics, Vol. 12, No. 2 (2012), pp. 285-310

 

H. Zarkob, S. Ziaei-Rad, M. Fathi, H. Dadkhah

Synthesis, Characterization and Bioactivity Evaluation of Porous Barium Titanate With Nanostructured Hydroxyapatite Coating for Biomedical Application

Advanced Engineering Materials, Volume 14, Issue 6, pages B322–B329, June 2012

 

H. M. Khanlo, M. Ghayour, S. Ziaei-Rad

Bearings coefficients effects on chaotic and bifurcation behavior of flexible rotor systems subjected to rub-impact

Vibroengineering. Journal of Vibroengineering. June 2012. Volume 14, Issue 2

 

R. Ramezanpour, M. Ghayour, S. Ziaei-Rad

Dynamic behavior of Jeffcott rotors with an arbitrary slant crack orientation on the shaft

Applied and Computational Mechanics 6 (2012) 35-52

 

Reza Tikani, Nader Vahdati, Saeed Ziaei-Rad

Two-mode operation engine mount design for automotive applications

Journal of Shock and Vibration, 19 (2012) 1–14 1

 

N. Nouri, S. Ziaei-Rad, S. Adibi, F. Karimzadeh

Fabrication and Mechanical property Prediction of Carbon Nanotube Reinforced Aluminium Nanocomposites

Materials and Design 2012, 34, pp. 1–14

 

H. Zarkob, S. Ziaei-Rad, M. Fathi, H. Dadkhah

An Investigation on Mechanical Behavior of Barium Titanate Foam with Hydroxyapatite

Ceramics International 38 (2012) 3445–3451

 

M. Silani, S. Ziaei-Rad, M. Esfahanian, V.B.C Tan

On the experimental and numerical investigation of clay/epoxy nanocomposites

Composite Structures, Volume 94, Issue 11, November 2012, Pages 3142-3148

 

M. Silani, H. Talebi, D. Arnold, S. Ziaei-Rad, T. Rabczuk

On the Coupling of a Commercial Finite Element Package with LAMMPS for Multiscale Modeling of Materials

Steel Research Journal, 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, pages 1371-1374, 2012

 

H. M. Khanlo, M. Ghayour, S. Ziaei-Rad

Disk Position Nonlinearity Effects on the Chaotic Behavior of Rotating Flexible Shaft-Disk Systems

Journal of Mechanics / Volume 28 / Issue 03 / September 2012, pp 513 – 522

 

M. Silani, S. Ziaei-Rad

Optimum Preform Design in Close Die Hot Forging

Steel Research Journal, 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, pages 191-194, 2012

 

I. Dayyani, S. Ziaei-Rad, H. Salehi

Numerical and experimental investigations on mechanical behavior of composite corrugated core

Applied Composite Materials (2012) 19:705–721

 

Reza Tikani, Saeed Ziaei-Rad, Nader Vahdati

Effective Reduction of Stiffness at Peak Frequency in Hydraulic Engine Mounts by Using Magneto-Rheological Fluids

Vibroengineering. Journal of Vibroengineering. June 2012. Volume 14, Issue 2

 

Reza Hedayati, Saeed Ziaei-Rad

Investigation of Material Model, Equation of State and Mesh density on Numerical Simulation of Bird Strike

Journal of Mechanical Engineering (Tabriz), Vol.42, No.1, Spring and Summer 2012

 

N. Nouri, S. Ziaei-Rad

Mechanical property evaluation of buckypaper/epoxy composites using molecular dynamics simulations fully implemented on graphical processing units

Journal of Computational and Theoretical Nanoscience, Vol. 9, No. 12, pp. 2144-2154 (2012)

 

Reza Hedayati, Saeed Ziaei-Rad

Effect of Bird Geometry and Orientation on Bird-Target Impact Analysis using SPH Method

International Journal of Crashworthiness, Volume 17, Issue 4, pp. 445-459, 2012

2011

M. Yadollahpour, S. Ziaei-Rad, F. Karimzadeh, J. Eskandari-Jam

A numerical study on the damping capacity of metal matrix nanocomposites

Simulation Modelling Practice and Theory, Vol. 19, 2011, pp. 337–349

 

M. Salehi, S. Ziaei-Rad, M. Ghayour, M.A. Vaziri-Zanjani

A Frequency Response Based Structural Damage Localization Method Using Proper Orthogonal Decomposition

Journal of Mechanics, Vol. 27, No. 2, June 2011, pp. 157-166

 

M. Eftekhari, M. Mahzoon, S. Ziaei-Rad

An Evolutionary Search Technique to Determine Natural Frequencies and Mode Shapes of Composite Timoshenko Beams

Mechanics Research Communications, Vol. 38 (2011), pp. 220–225

 

J. Kadkhodapour, A. Butz, S. Ziaei-Rad, S. Schmauder

A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model

International Journal of Plasticity, Volume 27, Issue 7, July 2011, Pages 1103-1125

 

J. Kadkhodapour, A. Butz, S. Ziaei-Rad

Mechanisms of void formation during tensile test in a commercial dual phase steel

Acta Materialia, Volume 59, Issue 7, April 2011, Pages 2575-2588

 

J. Kadkhodapour, S. Schmauder, D. Raabe, S. Ziaei-Rad, U. Weber, M. Calcagnotto

Experimental and numerical study on geometrically necessary dislocations (GND) and non-homogeneous mechanical properties of the ferrite phase in dual phase steels

Acta Materialia, Volume 59, Issue 11, June 2011, Pages 4387-4394

 

B. Shahin, S. Ziaei-Rad, M. Esfahanian

A lumped parameter model for disk brake squeal and its suppression through use of dither signals

International Journal of Vehicle, Noise and Vibration (IJVNV), Vol. 7, No. 3, Sept. 2011

 

R. Hedayati, S. Ziaei-Rad

Effect of Impact Orientation on Bird Strike Analysis

International Journal of Vehicle Structures & Systems (IJVSS), 2011, 3(3), 184-191

 

O. Aghababaei, H. Nahvi, S. Ziaei-Rad

Sensitivity Analysis on Dynamic Responses of Geometrically Imperfect Base Excited Cantilevered Beams

Journal of Vibroengineering. March 2011. Volume 13, issue 1. ISSN 1392-8716, pages 52-65

 

M. Salehi, S. Ziaei-Rad, M. Ghayour, M.A. Vaziri-Zanjani

A non Model-based Damage Detection Technique Using Dynamically Measured Flexibility Matrix

Iranian Journal of Science & Technology, Transaction B, Engineering, Vol. 35, pp. 137-149, 2011

 

M. Kamalvand, M. Madhkhan, B. Hamidi, A. Vahedi, S. Ziaei-Rad, M. A. Vaziri

The Effect of Filter Type, Concentration, and Type of Carbon Nanotube on the Buckypaper Surface Quality

International Journal of Nanoscience, Vol. 10, No. 1, 2011, pp. 1-4

 

R. Hedayati, S. Ziaei-Rad

Effect of Foam Core on the Integrity of Tailplane Leading Edge during Bird Strike Event

Journal of Aircraft, Vol. 48, No. 6, 2011, pp. 2080-2089

 

M. Esfahanian, E. Kabiri, S. Ziaei-Rad

Rollover Simulation and Required Structural Modification of O457 Bus

Numerical Methods in Engineering, No.2, Vol. 29, 2011, pp. 47-65

 

N. Nouri, S. Ziaei-Rad

A Molecular Dynamics Investigation on Mechanical Properties of Cross-Linked Polymer Networks

Macromolecules, 2011, 44 (13), pp 5481–5489

 

B. Shahin, M. Esfahanian, S. Ziaei-Rad

Effect of Different Parameters on Break Squeal

Numerical Methods in Engineering, Vol. 30, No. 1, 2011, pp. 45-59

 

T. Feizi, M. Esfahanian, R. Tikani, S. Ziaei-Rad

Simulation of the dynamic behavior of a new magnetorheological engine mount for automotive applications

International Journal of Automotive Engineering, Vol. 1, No. 2, 2011, 97-104

 

R. Hedayati, S. Ziaei-Rad

Comparison of numerical methods in perpendicular and inclined bird strike events

Modares Journal of Mechanics, Vol. 11, No.2, 2011, pp. 13-25

2010

Mohammad Rahimi, Saeed Ziaei-Rad

Uncertainty treatment in forced response calculation of mistuned bladed disk

Mathematics and Computers in Simulation 80 (2010), pp 1746–1757

 

O. Aghababaei, H. Nahvi, S. Ziaei-Rad

Dynamic bifurcation and sensitivity analysis of non-linear non-planar vibrations of geometrically imperfect cantilevered beams

International Journal of Non-Linear Mechanics 45 (2010), pp 121–139

 

H. Salehi, S. Ziaei-Rad, M.A. Vaziri-Zanjani

Bird Impact Effects on Different Types of Aircraft Bubble Windows Using Numerical and Experimental Methods

International Journal of Crashworthiness, Vol. 15, No. 1, February 2010, pp 93–106

 

A. Ariaei, S. Ziaei-Rad, M. Ghayour

Repair of a cracked Timoshenko beam subjected to a moving mass using piezoelectric patches

International Journal of Mechanical Sciences, Volume 52, Issue 8, August 2010, Pages 1074-1091

 

S. Ziaei-Rad, E. Koucheki, M. Imregun

Thermoelastic modeling of rotor response during shaft/seal rub

Journal of Applied Mechanics Volume 77, Issue 6, 061010, November 2010

 

M.M. Zaeri, S. Ziaei-Rad, A. Vahedi, F. Karimzadeh

The mechanical modelling of carbon nanomaterials from nanotubes to buckypaper

Carbon, Volume 48, Issue 13, November 2010, Pages 3916-3930

 

M. Salehi, S. Ziaei-Rad, M. Ghayour, M.A. Vaziri-Zanjani

A Structural Damage Detection Technique Based on Measured Frequency Response Functions

Contemporary Engineering Sciences, Vol. 3, 2010, no. 5, 215 - 226

 

M. Yadollahpour, S. Ziaei-Rad, F. Karimzadeh

Finite Element Modeling of Damping Capacity in Nanocrystalline Materials

International Journal of Modelling, Simulation and Scientific Calculation (IJMSSC), Vol. 1, Issue 3, pp. 421, 2010

 

R. Tikani, N. Vahdati, S. Ziaei-Rad, M. Esfahanian

A New Hydraulic Engine Mount Design without the Peak Frequency

Journal of Vibration and Control 1077546310380432, first published on November 22, 2010 doi:10.1177/1077546310380432

 

R. Ghayour, M. Ghayour, S. Ziaei-Rad

Vibration Analysis of Tapered Rotating Composite Beams Using the Hierarchical Finite Element

Applied and Computational Mechanics 4 (2010) 1–14

2009

K. Hasanpour, S. Ziaei-Rad, M. Mahzon

A large deformation framework for compressible viscoelastic materials: Constitutive equations and finite element implementation

International Journal of Plasticity, Vol, 25, Issue 6, pp. 1154-1176, 2009

 

O. Aghababaei, H. Nahvi, S. Ziaei-Rad

Non-linear non-planar vibrations of geometrically imperfect inextensional beams, Part I: Equations of motion and experimental validation

International Journal of Non-Linear Mechanics, Vol. 44, No. 2, pp 146-159, 2009

 

O. Aghababaei, H. Nahvi, S. Ziaei-Rad

Non-linear non-planar vibrations of geometrically imperfect inextensional beams. Part II—Bifurcation analysis under base excitations

International Journal of Non-Linear Mechanics, Vol. 44, No. 2, pp 160-178, 2009

 

A. Ariaei, S. Ziaei-Rad, M. Ghayour

Vibration analysis of beams with open and breathing cracks subjected to moving masses

Journal of Sound and Vibration, Volume 326, Issues 3-5, 9 October 2009, pp 709-724

 

J. Kadkhodapour, S. Ziaei-Rad, F. Karimzadeh

Finite-element modelling of rate dependent mechanical properties in nanocrystalline materials

Computational Materials Science, Volume 45, Issue 4, June 2009, pp 1113-1124

 

M. Yadollahpour, J. Kadkhodapour, S. Ziaei-Rad, F. Karimzadeh

An experimental and numerical investigation on damping capacity of nanocomposite

Materials Science and Engineering: A, Volume 507, Issues 1-2, 15 May 2009, pp 149-154

 

Ghader Rezazadeh, Ahmadali Tahmasebi, Saeed Ziaei-Rad

Nonlinear electrostatic behavior for two elastic parallel fixed–fixed and cantilever microbeams

Mechatronics, Vol. 19, No. 6, pp 840-846, 2009

2008

K. Hasanpour, S. Ziaei-Rad

Element Simulation of Polymer Behaviors Using a Three-Dimensional, Finite Deformation Constitutive Model

Computers and Structures, Vol. 86, pp. 1643–1655, 2008

 

L. Mirfendereski, M. Salimi, S. Ziaei-Rad

Parametric Study and Numerical Analysis of Empty and Foam-Filled Thin-walled Tubes under Static and Dynamic Loadings

International Journal of Mechanical Sciences, Vol. 50, pp. 1042– 1057, 2008

 

A. Kermanpur, H. Sepehri Amin, S. Ziaei Rad, N. Nourbakshnia, M. Mosaddeghfar

Failure Analysis of Ti6Al4V Gas Turbine Compressor Blades

Engineering Failure Analysis, Vol. 15, pp. 1052–1064, 2008

 

N. Nourbakshnia, S. Ziaei-Rad, A. Kermanpur, H. Sepehri Amin

Numerical Simulation and Experimental Investigation of the Failure of a Gas Turbine Compressor Blade

Key Engineering Materials Vols. 385-387, pp. 401-404, 2008

 

S. Ziaei-Rad, F. Janabi-Sharifi, M. Daneshpanah, A. Abdollahi, H. Ostadi, H. Samani

A Practical Approach to Control and Self-Localization of an Omni-Directional Mobile Robot

WSEAS Transactions on Systems and Control, Issue 5, Volume 3, pp. 413-424, 2008

 

S. Ziaei-Rad, M. Salimi, L. Mirfendereski

Finite element modelling of foam-filled tapered thin-walled rectangular tubes under oblique impact loading

Steel research international 79, Volume 2, pp 317-324, 2008

 

R. Mehrabi, M. Silani, S. Ziaei-Rad, M. Salimi, A. Kamranian

Influences of operational parameters on chatter vibration of cold rolling machines using finite element method

Steel research international 79, Volume 1, pp 467-474, 2008

 

M. Olfatnia, M. Salimi, S. Ziaei-Rad, A. Kamranian

Investigation into sources of chatter and vibrations in cold rolling mills

Steel research international 79, Volume 1, pp 459-466, 2008

 

2007

F. Karimzadeh, S. Ziaei-Rad, S. Adibi

Modelling Considerations and Material Properties Evaluation in Analysis of Carbon Nano-Tubes Composite

Metallurgical and Materials Transactions B, Vol. 38B, pp. 695-705, 2007

 

M. Salehi, S. Ziaei-Rad

Ground Vibration Test (GVT) and Correlation Analysis of an Aircraft Structure Model

Iranian Journal of Science & Technology, Transaction B, Engineering, Vol. 31, No. B1, pp 65-80, 2007

 

S. Ziaei-Rad, A. Ariaei, M. Imregun

Vibration analysis of Timoshenko beams under uniform partially distributed moving masses

Journal of Multi-body Dynamics, Vol. 221, Part K, pp. 1-16, 2007

 

H. Zamani, S. Ziaei-Rad

Numerical and experimental investigation on coupled bending-bending-torsion vibration of helicopter blades with initial twist angle

Journal of Esteghlal, Vol. 25, No. 2, pp. 165-182, 2007 (In Farsi)

Latest Events and Seminars

Visitors Counter

© 2009-2024 by GPIUTMD

Online Visitors

We have 23 guests and no members online

ارتقاء امنیت وب با وف بومی